 |
Newman Roller & Cap Frames |  |
| M-1
Cap |
 |
| MZX
Manual |
|
| M3
Automatic |
 |
| M6 |
 |
| Start-Up
Kits |
 |
TENSION LOSS after printing is easily controlled. Quickly (30-60 secs.) rotate only one roller to retension and restore your mesh to it's original tension (Newtons) level; increasing your fabric life and gaining control of printing variables.
NO NEED TO STORE FRAMES. Reduce your frames on hand, increase valuable shop space, and library only your film and digital file.
INVEST YOUR MONEY. Like other capital equipment in your shop, Newman Roller Frames® are a long-term investment engineered to last! In most cases, Newman Roller Frames® can be combined with lease purchases.
| SIZE |
DESCRIPTION |
TYPICAL PRESS |
| "8.5
X 12" OD |
with a 12" Ultra Thin Edge |
Jennings and Lawson |
| "10
X 13" OD |
with a 13" Ultra Thin Edge |
Altas and Antec |
| "7.25
X 14" OD |
with a 7.25" Sq. Bar & a 14" Thin Edge |
Hopkins Direct Drive |
| "7.25
X 14" OD |
with a 7.25" Sq. Bar & a 14" Thin Edge |
Hopkins Hat Max cap attachment |
| "7.25
X 17" OD |
with a 7.25" Sq. Bar & a 17" Thin Edge |
Richardson |
CUSTOM
SIZES AVAILABLE M-1 Roller Diameter: 1 1/16" (27mm)
Minimum Roller Length: 6" (152mm) OD
Maximum Roller Length: 20" (508mm) OD
| SIZE |
DESCRIPTION |
| "18 X 20" ID (45.72 X 50.80cm18) |
with 3 rollers and an 18" Square Bar |
| "23 X 26"OD (58.42 X 66.04cm) |
with 3 rollers and a 23" Square Bar |
| "23 X 28"OD (58.42 X 71.12cm) |
with 3 rollers and a 23" Square Bar |
| "23 X 31" OD (58.42 X 78.74cm) |
4 Rollers (Sq. Bar available at add'l cost) |
CUSTOM SIZES AVAILABLE
MZX Roller Diameter: 1 7/16" (37mm)
Minimum Roller Length: 12" (305mm) OD
Maximum Roller Length: 28" (711mm) OD
| CATEGORY |
MODEL |
SIZE |
| Category 1 |
M3/M3A |
"23 X 31" OD (58.42 X 78.74cm) |
|
|
|
"25 X 31" OD (63.50 X 78.74cm) |
|
|
|
"23 X 30" OD (58.42 X 76.20cm) |
| Category 1A |
M3 |
"23 X 31" OD (58.42 X 78.74cm) |
| Category 2 |
M3/M3A |
"23 X 33" OD (58.42 X 83.82cm) |
|
|
|
"25 X 33" OD (63.50 X 83.82cm) |
|
|
|
"25 X 36" OD (63.50 X 91.44cm) |
|
|
|
"33 X 37" OD (58.42 X 93.98cm) |
| Category 3 |
M3A |
"30 X 40" OD (76.20 X 101.60cm) |
|
|
|
"31 X 42" OD (78.74 X 106.68cm) |
|
|
|
"33 X 42" OD (83.82 X 106.68cm) |
|
|
|
"33 X 45" OD (83.82 X 114.30cm) |
CUSTOM
SIZES AVAILABLE FOR TEXTILE & GRAPHICSM3 Roller Diameter: 1 5/8" (41mm)
Minimum Roller Length: 12" (305mm) OD
Maximum Roller Length: 33" (838mm) OD
* "A" designates reinforcement for additional strength and deflection reduction.
| CATEGORY |
MODEL |
SIZE |
| Category 4 |
M6/M6A |
"47 X 51" OD (119.4 X 129.5cm) |
|
|
|
"47 X 55" OD (119.4 X 139.7cm) |
| Category 5 |
M6A |
"50 X 52" OD (127 X 132.1cm) |
|
|
|
"55 X 62" OD (139.7 X 157.5cm) |
CUSTOM SIZES AVAILABLE FOR TEXTILE & GRAPHICS
M6 Roller Diameter: 2" (51mm)
Minimum Roller Length: 15" (381mm) OD
Maximum Roller Length: 55" (1397mm) OD
M6A* Roller Diameter: 2" (51mm)
Minimum Roller Length: 18" (457mm) OD
Maximum Roller Length: 66" (1676mm) OD
* "A" designates reinforcement for additional strength and deflection reduction.
|
|
M-1 Cap Frame Kit |
MZX Frame Kit |
M3 Frame Kit |
|||
| Model |
Quantity |
Model |
Quantity |
Model |
Quantity |
|
| Newman
Roller Frames |
4 |
12, 24 or 36 |
36, 48 or 100 |
|||
| Tool Kit |
M1 |
1 |
|
|
|
|
| Tool Kit w/SDI Torque Wrench |
|
|
MZX |
1 |
M3 |
1 |
| Alignment Clips (pkg) |
|
1 |
|
1 |
|
2 |
| Newman ST Meter™ |
2E |
1 |
2E |
1 |
1E |
1 |
| Corner Softening Tool |
|
1 |
|
2 |
|
2 |
| Fabric Protector (sets) |
|
4 |
|
12 |
|
12 |
| Quick Stretch Instructions |
|
1 |
|
1 |
|
1 |
| Clamp Adapters |
M1 |
8 |
|
|
M3 |
24 |
| 2" Clear Split Liner Tape (roll) |
|
1 |
|
|
|
|
| Newman Roller Tape™-Purple(roll) |
|
|
|
1 |
|
3 |
| Newman Roller Tape™-Teal (roll) |
|
|
|
|
|
1 |
| 4 oz C5A Anti-seize Lubricant |
|
|
|
|
|
1 |
| Quality Control Log Book |
|
|
|
|
|
1 |
| 10X Light Loupe |
|
|
|
|
|
1 |
